2. Measuring instruments
  3. Calipers
  4. Vernier caliper

New products

Vernier caliper

Vernier DIN caliper  with resolution of 0.02 or 0.05 mm is produced  MICROTECH and suitable for external, internal and depth measurements. These analog calipers are entered in the State register of Ukraine No. U1987-95 and confirm DIN862 standard.
Vernier caliper MICROTECH has hand-finished surfaces of the measuring jaws to Ra <0.36 μm ensures...

Vernier DIN caliper  with resolution of 0.02 or 0.05 mm is produced  MICROTECH and suitable for external, internal and depth measurements. These analog calipers are entered in the State register of Ukraine No. U1987-95 and confirm DIN862 standard.
Vernier caliper MICROTECH has hand-finished surfaces of the measuring jaws to Ra <0.36 μm ensures compliance with the metrological characteristics of DIN862.
All MICROTECH calipers pass control in metrology laboratory accredited according to ISO 17025. 
Warranty for the digital caliper - 12 months

 
More

Vernier caliper  There is 1 product.

Subcategories

  • Vernier caliper type 1
    Vernier caliper type 1
    Vernier DIN caliper type 1 with resolution of 0.02 or 0.05 mm is produced  MICROTECH and suitable for external, internal and depth measurements. These analog calipers are entered in the State register of Ukraine No. U1987-95 and confirm DIN862 standard.
    Vernier caliper MICROTECH has hand-finished surfaces of the measuring jaws to Ra <0.36 μm ensures compliance with the metrological characteristics of DIN862.
    All MICROTECH calipers pass control in metrology laboratory accredited according to ISO 17025. 
    Warranty for the digital caliper - 12 months
  • Vernier caliper type 2
    Vernier caliper type 2
  • Vernier caliper type 3
    Vernier caliper type 3