Vickers hardness tester HVТ-10P

Stationary hardness testers MICROTECH type HVT-10P are designed to measure the hardness of products, metals and alloys by Vickers methods on the HV scale with a load range of 2.942-98.0 H. With a resolution of 0.1 HV.
In terms of the degree of automation of the test cycle, the Vickers hardness tester MICROTECH HVT-10P belongs to devices with an electronic drive for raising (lowering) the stage and an automatic cycle of applying (removing) test loads.
There are modifications of the Vickers Hardness Tester with control on an 8 inch touch screen.
In the computerized Vickers hardness tester HVT-10, the type of scale, test load, indenter type, sample holding time under load, and print size are entered using the touch screen of the device. The hardness value is automatically displayed digitally on the LCD. It is also possible to fully automate the measurement process.
In terms of its technical and metrological characteristics, the hardness tester meets the requirements of GOST and ISO.
All MICROTECH hardness testers pass metrological control in an ISO17025 accredited metrological laboratory.
Warranty for Vickers hardness testers from Kharkiv MICROTECH - 12 months
You can buy a Vickers hardness tester at MICROTECH or from one of the distributors.