HRA-2
New product
Stationary hardness testers MICROTECH type HRA-2 are designed to measure the hardness of products, metals and alloys by Rockwell methods on the HRA, HRB, HRC scale with a load range of 588-1471 N. With a resolution of 0.5 HR.
Measuring range ,mm | 20-95 HRA 10-100 HRB 20-70 HRC |
Analog indication | + |
Force | 588,4-1471 |
Depth, mm | 130 |
Scale | Rockwell |
Indication | Analog |
Max. height, mm | 200 |
Stationary hardness testers MICROTECH type HRA-2 are designed to measure the hardness of products, metals and alloys by Rockwell methods on the HRA, HRB, HRC scale with a load range of 588-1471 N. With a resolution of 0.5 HR.
According to the degree of automation of the test cycle, the Rockwell hardness tester MICROTECH HRA-2 belongs to devices with an electronic drive for raising (lowering) the stage and a motorized cycle for applying (removing) test loads.
Stationary Rockwell hardness testers MICROTECH are equipped with a prismatic, two flat tables and a set of indenters.
In terms of its technical and metrological characteristics, the hardness tester meets the requirements of GOST and ISO.
All MICROTECH hardness testers pass metrological control in an ISO17025 accredited metrological laboratory.
Warranty for Rockwell hardness testers from Kharkiv MICROTECH -12 months
You can buy a Rockwell hardness tester at MICROTECH or from one of the distributors.