Super Rockwell hardness tester HRSD-3

Stationary hardness testers MICROTECH type HRSD-3 are designed to measure the hardness of products, metals and alloys by the Super-Rockwell methods on the HR scale with a load range of 147-441 N. With a resolution of 0.5 HR.
In terms of the degree of automation of the test cycle, the Super-Rockwell hardness tester MICROTECH HRSD-3 belongs to devices with an electronic drive for raising (lowering) the stage and an automatic cycle for applying (removing) test loads.
There are modifications of the Super-Rockwell Hardness Tester with digital indication.
In the computerized Super-Rockwell hardness tester HRSD-3, the type of scale, test load, type of indenter, time of holding the sample under load are entered using the touch screen of the device. The hardness value is automatically displayed digitally on the LCD.
Stationary hardness testers Super-Rockwell MICROTECH are equipped with a prismatic, two flat tables and a set of indenters.
In terms of its technical and metrological characteristics, the hardness tester meets the requirements of GOST and ISO.
All MICROTECH hardness testers pass metrological control in an ISO17025 accredited metrological laboratory.
Warranty for hardness testers Super-Rockwell Kharkiv MICROTECH - 12 months
You can buy a Super-Rockwell hardness tester at MICROTECH or from one of the distributors.