M2 View larger

Digital Force Gauges Series ДЦ-0,5



New product

Digital push pull gauge Mark-10 with measuring range 0.5N pass metrological control in accredited lSO 1700.5 laboratory.

More details


Product Videos

113 400,00грн

Data sheet

Country of manufactureUSA
Range, Nless than 10
Measuring range ,mm0,5H
Digital indication+
Data outputUSB,RS-232
Дискретность , H0,0001
ScaleslbF, kgF, N
Accuracy, %0,1%

More info

  • Accuracy: ±0.1% of full scale
  • Sampling rate: 7,000 Hz
  • Power: AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
  • Battery Life:
    - Backlight on: up to 7 hours of continuous use
    - Backlight off: up to 24 hours of continuous use
  • Measurement units: lbF, ozF, gF, kgF, N, kN, mN (depending on model)
  • Outputs:
    - USB / RS-232: Configurable up to 115,200 baud. Includes Gauge Control Language 2 for full computer control.
    - Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible Devices.
    - Analog: ±1 VDC, ±0.25% of full scale at capacity.
    - General purpose: Three open drain outputs, one input.
    - Set points: Three open drain lines.
    - Safe overload: 150% of full scale (display shows “OVER” at 110% and above)
  • Weight:
    - M5-012 - M5-100: 1.0 lb [0.45 kg]
    - M5-200 - M5-500: 1.2 lb [0.54 kg]
    - M5-1000 - M5-2000: 1.8 lb [0.82 kg]
  • Included items: Carrying case, chisel, cone, V-groove, hook, flat, extension rod, universal voltage AC adapter, battery,
    quick-start guide, USB cable, resource CD (USB driver, MESURTMLite software, MESURTMgauge DEMO software, and user's guide), NIST-traceable certificate of calibration with data
  • Warranty: 3 years (see individual statement for further details)
  • All Mark-10 digital force gauges pass  metrological control in accredited lSO 17025 laboratory.


30 other products in the same category: