Stationary hardness testers MICROTECH type HRA and HRT are designed to measure the hardness of products, metals and alloys by Rockwell methods on the HRA, HRB, HRC scale with a load range of 588-1471 N. With a resolution of 0.5 or 0.1 HR.
In terms of the degree of automation of the test cycle, the Rockwell hardness tester MICROTECH HRT belongs to devices with an electronic drive for raising (lowering) the stage and an automatic cycle for applying (removing) test loads.
There are modifications of the Rockwell Hardness Tester with analog or indication and control on an 8 inch touch screen.
In the computerized Rockwell hardness tester HRT, the type of scale, test load, type of indenter, and the holding time of the sample under load are entered using the touch screen of the device. The hardness value is automatically displayed digitally on the LCD.
Stationary Rockwell hardness testers MICROTECH are equipped with a prismatic, two flat tables and a set of indenters.
In terms of its technical and metrological characteristics, the hardness tester meets the requirements of GOST and ISO.
All MICROTECH hardness testers pass metrological control in an ISO17025 accredited metrological laboratory.
Warranty for Rockwell hardness testers from Kharkiv MICROTECH -12 months
You can buy a Rockwell hardness tester at MICROTECH or from one of the distributors.