Stationary hardness testers MICROTECH type HBA and HBT are designed to measure the hardness of products, metals and alloys by Brinell methods on the HB scale with a load range of 306.5-29421 N. With a resolution of 0.1 HB.
In terms of the degree of automation of the test cycle, the Brinell hardness tester MICROTECH HBT belongs to devices with an electronic drive for raising (lowering) the stage and an automatic cycle for applying (removing) test loads.
There are modifications of the Brinell Hardness Tester with analog or indication and control on an 8 "touch screen.
In the computerized Brinell hardness tester HBT, the type of scale, the test load, the type of indenter, the time of holding the sample under load, and the size of the print are entered using the touch screen of the device. The hardness value is automatically displayed digitally on the LCD. It is also possible to fully automate the measurement process.
Stationary Brinell hardness testers MICROTECH are equipped with a prismatic, two flat stages and a set of indenters, an optical or digital CCD microscope.
In terms of its technical and metrological characteristics, the hardness tester meets the requirements of GOST and ISO.
All MICROTECH hardness testers pass metrological control in an ISO17025 accredited metrological laboratory.
Warranty for hardness testers Brinell Kharkiv MICROTECH -12 months
You can buy a Brinell hardness tester at MICROTECH or from one of the distributors.